Electric Vehicle Chargers

Crack open any smart EV charger, metaphorically speaking, and take a good look at the digital management system running the show. Every system is different, and it’s easy to say that not all are coded equal. When choosing a system, it’s best to know more than just the basics. Examine all the charging system features available. Sometimes, those lesser-known features are what makes a software solution something you couldn’t imagine being without. EV OS is a cloud-based operating system that simplifies the process of owning and operating 1 or 100+ EV charging stations. With every charger accounted for in one place, it’s easy to see your entire charging system. In fact, the EV OS robust infrastructure offers a lot under the hood! Here are just a few features our customers enjoy.

EV Swift Level 2 Home Charger

Secure, Residential & Commercial EV Charging

Our residential electric vehicle charger (EV Swift Non-Connected Level 2 Charger) uses technology that optimizes the use of available power from the utility. The home charger is up to six times faster than a standard level 1 charger and delivers up to 25 miles of RPH. It is simple plug n’ play, with no configuration required. The unit is watertight and built for use indoors in a garage or outdoors. It is impact resistant and undamaged by formation of ice.

Simplest Way to Charge Your EV
Plug N’ Play – No Configuration Required
Watertight – Built for Indoors or Outdoors

Residential

Voltage
208-240 Vac, Single Phase

Frequency
60 Hz

Current
32 A

Charging Connector
SAE J1772

Charging Cable Length
25 ft.

Indicators
Green Steady: Ready Green Flashing: Suspended (Occupied) Blue Flashing: Charging Red Steady: Unrecoverable Fault Red FlashingL: Recoverable Fault Yellow Steady: Out of Service Yellow Falshing: Booting / Firmware Upgrading

Operation Temperature
-22 ~ 122 °F / -30 ~ 50 °C

Storage Temperature
-40 ~ 158 °F / -40 ~ 70 °C

Mounting Type
Wall-mount

Wiring Type
NEMA 6 – 50

IP Performance
NEMA 4

Impact Resistance
IK10

Dimensions (H x W x D, in.)
11.14” x 7.56” x 3.11”

Autonomous Revenue Generation

EV AC chargers offer convenience and efficiency to both customers and service providers. These charging stations feature simple installation and management. AC chargers are easy additions to any location and are highly requested by EV-driving customers. They are excellently suited to retail and commercial parking lots, workplaces, restaurants, multi-unit dwellings, and anywhere else looking to provide a smooth, convenient charging experience. EV AC chargers are sturdy and can stand up to the elements. They are safety certified, and the design is both waterproof and dustproof. Install them anywhere without environmental concerns. User Experience chargers are easy to engage with and use. It
features a simple design to make charging a truly painless experience. Drivers need only scan, plug in, and charge. No annoying memberships or app downloads are necessary. Users can begin charging either through an authorized RFID smart card (perfect for office staff or apartment buildings), the mobile app, or our online web portal. EV Operating System (EV OS) EV OS is a cloud-based operating system that unifies the management of all EV charging stations. It centralizes charger operation and streamlines the administration of the entire charging network. The EV OS dashboard pulls together information from every connected charger, providing a wealth of information right at your fingertips. Revenue generation becomes practically hands-free as EV OS implements your chosen settings. It even runs charging station diagnostics and self-repair protocols, dramatically reducing
the need for expensive maintenance and repairs.

EV OS supports autonomous revenue generation by streamlining all
aspects of EV charger management.
Service providers have access to up-to-the-minute data on usage,
monetization, power status, and more.
EV AC chargers support universal, automatic pay-at-the-pump
transactions through Apple Pay, Google Pay, credit cards, or the
member-ship management program in EV OS.
Funds automatically transfer to the management-designated account.

Pricing

Connect chargers from multiple sites to a shared network in EV OS,
enabling pricing changes right from the EV OS dashboard.
Change pricing and availability on the fly or via pre-set, automated
sched-ules with the click of a button.
Set pricing based on either time taken (price per minute) or energy
usage (price per kW).
Enjoy set-it-and-forget-it automatic peak hour price changes.

User Management

Chargers can offer multiple pricing tiers through EV OS’s integrated
user management system.
Users can make payments through at-the-pump mobile transactions or
targeted membership plans for VIPs, special guests, residents, or staff.
Membership management allows for charging to be available to a
select few as a free amenity while still requiring payment by the wider
public.
Integrated user management is ideal for staff and fleet charging, leaving
un-used chargers available for public use.

Extensibility

EV Tech offers additional software services specially developed
for a wide range of charging environments, including those for
fleets, workplaces, residences, shopping centers, dealerships,
gas stations, smart cities, and more.
To support the different needs of our customers, EV AC chargers
support intelligent load balancing, distributing power across
multiple chargers on the same network.
EV Tech load balancing means more chargers can be installed
on the same site without costly site upgrades.

MEMBERSHIP-LESS CHARGING
Nothing’s worse than pulling up to a charging station, ready to charge, only to realize the station system requires an app or (even worse) a membership to operate. Either you’re stuck while you download the app or set up a new account and billing, or you have to find another charger somewhere else. A station running EV OS requires no memberships or accounts for public charging. Drivers scan the QR code on the device, choose their preferred payment method, and start charging! It’s as simple as that. Input a phone number, and the station will send out an SMS when the vehicle finishes charging.

AUTOMATED PEAK-HOUR PRICING
Depending on your location, energy prices may vary wildly throughout the day. In either of these cases, you can choose to employ our peak hour pricing feature. In the operating system, choose the time and price you want to set for those peak hours. Once you’ve chosen your price and times, EV OS takes it from there. Your chargers will now automatically switch pricing at your predetermined time without you lifting a finger! Alter the time or prices whenever you want.

OCCUPANCY FEE
What do you do when there’s someone in the community who insists on parking at your EV charger for the whole day? While there’s no polite way to force a driver to move, EV OS has an easy feature to solve your lost revenue: occupancy fee. Once a vehicle has reached a full charge, the occupancy fee kicks in. Set the occupancy charge (hourly) and even offer a grace period (15 mins up to 2 hours!) between full charge and the fee kicking in. It’s easy to set everything to suit the needs of your business.

LOAD MANAGEMENT
Not every power grid excels in the EV era. And even if your grid has no problem supporting a few EV chargers, what if you really want to install 10 instead of 4? EV OS provides load balancing for sites that need more chargers. No expensive electrical upgrades are required. The system intelligently distributes power across your chargers, sending that power where it’s needed when it’s needed.

THE BOTTOM LINE
EV OS includes more than just charging station management. Beyond autonomous operations and hands-off translation services, the charging system offers a wide
range of features and solutions. They’re perfect for taking your EV charging solution to the next level!

EV OS: Load Management

Electrical upgrades are complicated, time-consuming, and expensive. But how else are you going to install all the charging stations you need to meet the growing demand? Many companies offer hardware-based solutions that can divide electrical capacity across numerous charging stations. But not EV Tech. We have something better, more flexible, and future-proof because it can evolve with future charging needs. Activate the EV OS Load Management App, and experience a smooth, software-based answer to power management. EV Tech’s management platform, EV OS, can seamlessly integrate apps from the Apps Library. Access to the library can be added to any EV OS subscription and give the host access to a broad range of powerful, flexible solutions that optimize EV charger management. The Load Management App optimizes energy usage through the smart allocation of power, based on the state of charge of each connected vehicle.

Load Management App

Enabling the Load Management app is easy! And it works autonomously on its own!

o Utilizes smart algorithms and intelligent monitoring of chargers to balance
their electrical usage while ensuring that total electrical output stays within a
safe range.

o Smart energy allocations to connected chargers eliminate the need for
electrical upgrades.

o Doesn’t require additional physical wiring for implementation.

o Optimizes the usage of available power from the utility, while protecting the
local electrical systems from the dangers of overloading even when multiple
chargers are being used simultaneously.

o Offers flexible implementation options to suit your ideal number of chargers.

EV OS: Load Management

Who needs Load Management at their charging stations?
Destination businesses like hotels, restaurants, rest stops, shops, and cafes have begun to offer electric vehicle charging. In recent years, many have been experiencing the trend where more and more of their customers are driving an electric vehicle (EV). Having a charging station available at such businesses instantly puts them on the map for EV-driving customers. Having more charging stations available is vital to attracting more customers and offering a great customer experience.

When might Load Management be important?
The power panel capacity sets the number of charging stations. It varies based on the location and the power grid capacity. For instance, Alan’s hotel has an electrical power of 160A, which allows him to install four 32A charging stations. Only four because a 32A charging station needs 40A of power allocated. So, it has a 20% safety buffer. If Alan wanted to add more charging stations, he would need to contact his electric utility company for an upgrade. It can take months and a whole lot of money. However, Alan can easily offer more than four charging stations using EV OS Load Management App. And doesn’t have to go through all the hassle of upgrading his power panel capacity. Sounds easy!

How does it really work?
Let’s take a look at Alan’s hotel further. Alan contacted EV Tech and added two more charging stations. Now he has six charging stations on-site, and all six are operational without exceeding the 160A limit. It is possible through smart power allocation of EV Tech chargers through the Load Management App. The Flow When the first EV comes in, it charges with the full power of 32A. As additional EVs connect, the second, third, and fourth EVs continue to charge at full power of 32A. At this point, the system is drawing all available power for charging EVs. When the fifth EV arrives, the Load Management Application starts to kick in, and five EVs need to charge at the same time. The app recalculates the output for each EV and adjusts the power to 26A for each one. This way power usage stays within the limit of the electric panel. EV OS smart management sends the instructions to the EV chargers. Simultaneously, it continues to monitor the consumption rate of each charger. This process ensures compliance and makes any necessary adjustments in real-time. Every EV charges at an optimum level while the total output stays under the limit of 160A. These steps continue when the sixth EV connects to charge, and six EVs are charging at the same time. The output to each EV will be calculated again and dropped to 22A. The Load Management Application continues monitoring the consumption and adjusts the output accordingly as more energy becomes available when other chargers complete energy transfer. The exciting part is when Load Management Application detects that an EV is fully charged and no longer requires power. For example, when the first EV completes charging and leaves, the energy output will be increased from 22A to 26A
across the remaining five charging vehicles.

EV Swift 1000 Level 2 Smart Charger

EV Swift 1000 AC level 2 electric vehicle charging stations are perfect for use at hotels, retail plazas, and residential building parking lots. Clients choose them for build quality and reliability, and ease of use by drivers. We make is easy to manage with autonomous station operation via EV OS. These chargers are ideal for locations where drivers want to park for a few hours or more. The chargers are watertight for outdoor use and include WiFi connectivity for extended deployment flexibility.

Cloud Service
EV OS

Maximum Output Power
7.6 kW

Output Power
40 A @208~240 Vac, 1-phase

Vehicle Connector
SAE J1772

Cord length
25 feet / 7.6 m

Input Power
1-phase, 3-wire, 220~240 Vac, 40 A maximum

Grounding System
TN, TT

Display
OLED, 20 characters, 2 lines

Communication Protocol
OCPP 1.6 JSON

Connectivity
Ethernet, Wi-Fi

RFID
ISO/IEC 14443A/B

NEMA enclosures (NEMA)
NEMA 3R

Impact Protection
IK10

Electrical protection
Over voltage, under voltage, surge protection, ground fault protection, residual current device, short circuit protection, over current protection, over temperature protection

Operating Temperature
-31° to 131° F / -35° to 55° C

Dimensions
10.6 (W) x 14.1 (H) x 5.5 (D) in
270 (W) x 360 (H) x 140 (D) mm

Weight
27.4 lbs / 12.4 kg

Certifications
UL, ENERGY STAR

EV Swift 1003 Level 2 Smart Charger

EV Swift 1003 AC level 2 electric vehicle charging stations are perfect for use at hotels, retail plazas, and residential building parking lots. Clients choose them for build quality and reliability, and ease of use by drivers. We make is easy to manage with autonomous station operation via EV OS. These chargers are ideal for locations where drivers want to park for a few hours or more. The chargers are watertight for outdoor use and include WiFi and 4G connectivity for extended deployment flexibility.

Cloud Service
EV OS

Maximum Output Power
7.6 kW

Output Power
40 A @208~240 Vac, 1-phase

Vehicle Connector
SAE J1772

Cord length
25 feet / 7.6 m

Input Power
1-phase, 3-wire, 220~240 Vac, 80 A maximum

Grounding System
TN, TT

Display
OLED, 20 characters, 2 lines

Communication Protocol
OCPP 1.6 JSON

Connectivity
Ethernet, Wi-Fi, 4G (1-yr free cellular service included)

RFID
ISO/IEC 14443A/B

NEMA enclosures (NEMA)
NEMA 3R

Impact Protection
IK10

Operating Temperature
-31° to 131° F / -35° to 55° C

Dimensions
10.6 (W) x 14.1 (H) x 5.5 (D) in
270 (W) x 360 (H) x 140 (D) mm

Weight
27.4 lbs / 12.4 kg

Certifications
UL, ENERGY STAR

EV Swift 1005 Level 2 Smart Charger

EV Swift 1005 AC level 2 electric vehicle charging stations are perfect for use at hotels, retail and entertainment developments, and residential building parking lots. Clients choose them for build quality and reliability, and ease of use by drivers. We make is easy to manage with autonomous station operation via EV OS. These chargers are ideal for locations where drivers want to park for a few hours or more. The chargers are watertight for outdoor use and include ethernet and WiFi connectivity for extended deployment flexibility. Another benefit of the EV Swift 1005 is smart energy management for cost-effective deployment at locations with limited power input.

Cloud Service
EV OS

Maximum Output Power
11 kW

Output Power
48 A @200~240 Vac, 1-phase

Vehicle Connector
SAE J1772

Cord length
16.4 feet / 5 m

Input Power
1-phase, 3-wire, 220~240 Vac, 60 A maximum

Grounding System
TN, TT, IT

Display
LED Indicator, 5-inch LCD

Communication Protocol
OCPP 1.6 JSON (Ready for OCPP 2.0)

Connectivity
Ethernet, Wi-Fi

RFID
ISO/IEC 14443 A/B

NEMA enclosures (NEMA)
NEMA 4

Impact Protection
IK10

Operating Temperature
-22° to 122° F / -30° to 50° C

Dimensions
11.6 (W) x 19.9 (H) x 5.9 (D) in
295 (W) x 505 (H) x 150 (D) mm

Weight
19.2 lbs / 8.7 kg

Certifications
UL, FCC, ENERGY STAR

EV Swift 1007 Level 2 Smart Charger

EV Swift 1007 AC level 2 electric vehicle charging stations are perfect for use at hotels, retail plazas, and residential building parking lots. Clients choose them for build quality and reliability, and ease of use by drivers. We make is easy to manage with autonomous station operation via EV OS. These chargers are ideal for locations where drivers want to park for a few hours or more. The chargers are watertight for outdoor use and include ethernet and WiFi connectivity for extended deployment flexibility. Another benefit of the EV Swift 1007 is smart energy management for cost-effective deployment at locations with limited power input.

Cloud Service
EV OS

Maximum Output Power
19 kW

Output Power
80 A @200~240 Vac, 1-phase

Vehicle Connector
SAE J1772

Cord length
25 feet / 7.6 m

Input Power
1-phase, 3-wire, 220~240 Vac, 100 A maximum

Grounding System
TN, TT

Display
OLED, 20 characters, 2 lines

Communication Protocol
OCPP 1.6 JSON

Connectivity
Ethernet, Wi-Fi

RFID
ISO/IEC 14443A/B

NEMA enclosures (NEMA)
NEMA 3R

Impact Protection
IK10

Operating Temperature
-31° to 131° F / -35° to 55° C

Dimensions
10.6 (W) x 14.1 (H) x 5.5 (D) in
270 (W) x 360 (H) x 140 (D) mm

Weight
27.4 lbs / 12.4 kg

Certifications
UL, ENERGY STAR

EV Swift 1009 Level 2 Smart Charger

EV Swift 1009 AC level 2 electric vehicle charging stations are perfect for use at hotels, retail outlets, and residential building parking structures. Clients choose them for build quality and reliability, and ease of use by drivers. We make is easy to manage with autonomous station operation via EV OS. These chargers are ideal for locations where drivers want to park for a few hours or more. The chargers are watertight for outdoor use and include 4G, ethernet and WiFi connectivity for extended deployment flexibility. Another benefit of the EV Swift 1009 is smart energy management for cost-effective deployment at locations with limited power input.

Cloud Service
EV OS

Maximum Output Power
19 kW

Output Power
80 A @200~240 Vac, 1-phase

Vehicle Connector
SAE J1772

Cord length
25 feet / 7.6 m

Input Power
1-phase, 3-wire, 220~240 Vac, 100 A maximum

Grounding System
TN, TT

Display
OLED, 20 characters, 2 lines

Communication Protocol
OCPP 1.6 JSON

Connectivity
Ethernet, Wi-Fi, 4G (1-yr free cellular service included)

RFID
ISO/IEC 14443A/B

NEMA enclosures (NEMA)
NEMA 3R

Impact Protection
IK10

Operating Temperature
-31° to 131° F / -35° to 55° C

Dimensions
10.6 (W) x 14.1 (H) x 5.5 (D) in
270 (W) x 360 (H) x 140 (D) mm

Weight
27.4 lbs / 12.4 kg

Certifications
UL, ENERGY STAR

EV Swift 1011 Level 2 Smart Charger

EV Swift 1011 AC level 2 electric vehicle charging stations are perfect for use at hotels, retail outlets, and residential building parking areas. Clients choose them for build quality and reliability, and ease of use by drivers. We make is easy to manage with autonomous station operation via EV OS. These chargers are ideal for locations where drivers want to park for a few hours or more. The chargers are watertight for outdoor use and include ethernet and WiFi connectivity for extended deployment flexibility. A key feature of the EV Swift 1011 is the laser-engraved, illuminated QR code makes scanning easy in any lighting.

Cloud Service
EV OS

Maximum Output Power
7.6 kW

Output Power
32 A @200~240 Vac, 1-phase

Vehicle Connector
SAE J1772

Cord length
16.4 feet / 5 m

Input Power
1-phase, 3-wire, 220~240 Vac, 40 A maximum

Grounding System
TN, TT, IT

Display
LED Indicator

Communication Protocol
OCPP 1.6 JSON

Connectivity
Ethernet, Wi-Fi

RFID
RFID ISO/IEC 14443 A/B

NEMA enclosures (NEMA)
NEMA 3R

Impact Protection
IK08

Operating Temperature
-22° to 122° F / -30° to 50° C

Dimensions
10.2 (W) x 11 (H) x 3.9 (D) in
260 (W) x 280 (H) x 100 (D) mm

Weight
8.8 lbs / 4 kg

Certifications
UL, cUL, FCC